IR Camera

An infrared camera is a non-contact device that detects infrared energy (heat) and converts it into an electronic signal, which is then processed to produce a thermal image on a video monitor and perform temperature calculations. Heat sensed by an infrared camera can be very precisely quantified, or measured, allowing you to not only monitor thermal performance, but also identify and evaluate the relative severity of heat-related problems.

Specification
 

 

Network

 

Network Compression

H.264 / MPEG4 / MJPEG

LAN Port

YES

LAN Speed

10/100 Based-T Ethernet

Supported Protocols

DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP, HTTP, RTP, RTSP, RTCP, IPv4, Bonjour, UPnP, DNS, UDP

Frame Rate

NTSC: 30, PAL: 25

Number of Online Users

10

Security

Multiple user access levels with password / IP address filtering

Web management software

YES (Control up to 16 network cameras simultaneously)

Camera

 

Image Sensor

1/3" HR color CCD image sensor

Number of Pixels

768(H) x 494(V) <NTSC> / 752(H) x 582(V)) <PAL>

Minimum illumination

0.05 Lux / F1.4, 0 Lux (IR ON)

Electronic Shutter

1/60 (1/50) to 1/100,000 sec.

S/N Ratio

More than 48dB (AGC off)

Lens

f6.0mm

Lens Angle

48°

IR LED

56 units

IR Effective Range

Up to 40 meters

IR Shfit

YES

Smart Light Control

YES

White Balance

ATW

AGC

Auto

IRIS Mode

AES

IP Rating

IP67

Startup Temperature

-10ΓΆ„ƒ~40ΓΆ„ƒ

Operating Temperature

-20ΓΆ„ƒ~40ΓΆ„ƒ

Power Source (±10%)

DC12V

Others

 

Remote Control

YES

Motion Detection

YES

Alarm and event Notification

Image upload over FTP and Email

Minimum Web Browsing Requirements

Pentium 4 CPU 1.3 GHz or higher, or equivalent AMD

 

256 MB RAM

 

AGP graphics card, Direct Draw, 32MB RAM

 

Windows Vista, XP, Windows 2000 Server, ME, 98, DirectX 9.0 or later

 

Internet Explorer 6.x or later